Akulon® Ultraflow K-FKMV5


Polyamide 6
DSM Engineering Plastics

General
Material Stayus • Commercial: Active
Literature • Processing - Injection Molding (English)
• Technical Datasheet (English)
UL Yellow Card • E47960-524615
Search for UL Yellow Card • DSM Engineering Plastics
• Akulon® Ultraflow
Availability • Asia Pacific • Europe
Filler/Reinforcement • Mineral Filler, 25% Filler by Weight
Additive • Flame Retardant
Features • Flame Retardant • Heat Stabilized • High Flow
RoHS Compliance • RoHS Compliant
Forms • Pellets
Phisical Dry Conditioned Unit Test Method
Density 1.38 - g/cm3 ISO 1183
Molding Shrinkage
­ ­ Across Flow
­ ­ Flow
­
0.80
0.60
­
-
-
­
%
%
ISO 294-4
­
­
Water Absorption
­ ­ Saturation, 23°C
­ ­ Equilibrium, 23°C, 50% RH
­
6.2
1.8
­
-
-
­
%
%
ISO 62
­
­
Mechanical Dry Conditioned Unit Test Method
Tensile Modulus 6200 - MPa ISO 527-2
Tensile Stress (Break) 65.0 - MPa ISO 527-2
Tensile Strain (Break) 2.0 - % ISO 527-2
Impact Dry Conditioned Unit Test Method
Charpy Notched Impact Strength (23°C) 2.0 2.0 kJ/m2 ISO 179/1eA
Charpy Unntched Impact Strength (23°C) 25 30 kJ/m2 ISO 179/1eU
Thermal Dry Conditioned Unit Test Method
Heat Deflection Temperature
­ ­ 0.45 MPa, Unannealed
­ ­ 1.8 MPa, Unannealed
­
205
110
­
-
-
­
°C
°C
­
ISO 75-2/B
ISO 75-2/A
Melting Temperature 220 - °C ISO 11357-3
Electrical Dry Conditioned Unit Test Method
Surface Resistivity - > 1.0E+15 ohm IEC 60093
Volume Resistivity > 1.0E+15 - ohm.cm IEC 60093
Comparative Tracking Index - 600 V IEC 60112
Flammability Dry Conditioned Unit Test Method
Flammability Classification
­ ­ 0.750 mm
­ ­ 1.50 mm
­
V-2
V-2
­
-
-
­
­
­
IEC 60695-11-10,
-20
­
Glow Wire Flammability Index
­ ­ 1.50 mm
­ ­ 3.00 mm
­
960
960
­
-
-
­
°C
°C
IEC 60695-2-12
­
­
Glow Wire Ignition Temperature (1.50 mm) 725 - °C IEC 60695-2-13

.

- - . (044)408-34-64, (044)451-52-41

E-mail: info@polygon-ltd.com